2
1-800-727-5477 • www.sargentlock.com
A8257E 4/22
7800 and 8200 Series Mortise Lock
Installation Instructions
Used with Sectional Trim and V Series Indicators
Copyright © 2019, 2020, 2021, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in
whole or in part without the express written permission of SARGENT Manufacturing Company is prohibited. Patent
pending and/or patent www.assaabloydss.com/patents.
Tools Required
1
#2 & #3 Phillips
head screwdrivers
Flat blade
screwdriver
1/8
"
Allen
Wrench
3/32
"
Drill bit
T-20 Torx Screw
with Tamper Pin
Driver
Indicator Variants
2
Depending on function and option ordered, indicators are provided in the following variations, these instructions detail how
to install with cylinder, however other variations follow similar instructions. (Figure 1)
Contact factory for any questions.
Figure 1
Coin Turn
-
For
installation
on outside of
door.
Cylinder
-
For
installation
on inside or
outside of
door.
No input /
blank
- F
or
installation
on inside or
outside of
door.
Thumbturn
-
For installation
on inside of
door.
Lock set configuration
3
To set function of multi-function lock or to re-hand, see instructions on lock body.
