KP8877/KP8878 x ET x Lever Design
Keypad Operated RIM Exit Device
3
Rim Installation Instructions for KP8800 Series (Continued)
(#34)
Cylinder
Outside
of door
Wire
harness
ET control
Outside
of door
Inside of
door
(2) 1/4 - 20 x 2 3/8’’
Flat head machine
screws
Wire harness
Exit chassis
Exit chassis
Wire harness
(4) #10 Wood screws or
#10-24 machine screws
(2) #12-24 x 1- 7 ⁄ 8 ‘’
connecting screws
Inside
of door
1. Outside Trim
• Route harness through under cut of cylinderhole
and out to other side of door
• Mount “ET” control onto door
Center line for
(2) 1/4 - 20 x 2-3/8’’
flat head
machine screws
3. Cylinder Installation (KP8877 & 12-KP8877)
• Insert cylinder into “ET” control
• Mate cylinder tailpiece into hub of exit device
chassis
• Make sure “ET” harness is clear of cylinder and
cylinder tailpiece
C For (2) #12-24 x 1-7/8”
connecting screws
2. Inside Trim
• Route “ET” harness along track cutout for wood doors andac-
cess hole for metal doors
• Mount exit chassis carefully.
DO NOT PINCH HARNESS WIRES
• “ET” spindle will engage into the hub of exit device chassis
• Secure chassis with (2) 1/4-20 x 2-3/8” flat head-
machine screws
4. Securing Cylinder
• Secure cylinder to exit chassis using (2) #12-24
x 1-7/8” connecting screws
• Fasten exit chassis to door using (4) #10 wood
screws or #10-24 machine screws
5
Step #2 Install Outside & Inside Trim
8
A7137C
Copyright © 2018, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
01/31/18
