KP8877/KP8878 x ET x Lever Design
Keypad Operated RIM Exit Device
99# Master Code
50# 1# 03# Supervisory Code
*
Supervisory Code
*
*
To Enter a User Code:
*
99# Supervisory or Master Code
50# 1# User Number (04-97)# User Code
User Code
*
*
*
*
Yellow LED begins to blink slowly
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED begins to blink slowly
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
To Enter a Passage (Maintained Mode) Code:
When Passage Mode is used, the same User Code must be used to re-lock the lock.
99# Supervisory or Master Code
50# 2# User Number (04-97)# User Code
User Code
*
*
*
To Enter a One-Time User Code:
99# Supervisory or Master Code
50# 3# User Number# User Code
User Code
*
*
*
*
*
To Deactivate “Beep” with the Depression of Each Key:
99# Supervisory or Master Code
30# 0# 0#
Yellow LED continues to blink slowly
*
*
*
*
Yellow LED begins to blink slowly
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED begins to blink slowly
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED begins to blink slowly
To Reactivate “Beep” with the Depression of Each Key:
99# Supervisory or Master Code
30# 0# 1#
Yellow LED continues to blink slowly
*
*
*
To Clear the Entire Memory:
99# Master Code
*
Yellow LED blinks quickly
No beep on depression and yellow LED blinks slowly
No beep on depression and yellow LED goes out
46# 00000# 00000#
Yellow LED continues to blink slowly
*
PAUSE
Yellow LED begins to blink slowly again
*
*
*
Yellow LED blinks quickly
Beep on depression and yellow LED blinks slowly
Beep on depression and yellow LED goes out
Yellow LED begins to blink slowly
Yellow LED blinks quickly
No beep on depression and yellow LED goes out
Yellow LED goes out
NOTE:
This deletes ALL codes, including Master, Emergency and Supervisory. The Master Code is set back to 1234, Door Number to 0001 and Unlock
timeto 5 sec. If the Master Code is not known, Factory Assistance will be required to clear the memory. 1-800-810-WIRE.
To Program Door Numbers into Keypad:
99# Master Code
43# 0# Door Number# (Must be four digits)
Yellow LED blinks slowly
*
*
*
*
Yellow LED begins to blink slowly
Yellow LED begins to blink quickly
Yellow LED blinks slowly
Yellow LED goes out
5
Programming Instructions (Continued)
To Enter the Supervisory Code:
20
A7137C
Copyright © 2018, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
01/31/18