04/30/21
1-800-810-WIRE • www.sargentlock.com • A8151H 21
Copyright © 2016, 2019, 2021, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
IN120 / IN220 Mortise Lock
1. Next feed the cables/connectors through the inside mounting plate assembly and gasket*.
2. Secure the mounting assembly while ensuring proper alignment of outside reader and partially tighten
the (2) through-bolts on the inside of the door to secure the reader (Fig. 8A).
NOTE: Cable lengths exaggerated for illustrative purposes.
*Gasket is required for all installations.
Separate gasket from mounting plate to feed cables/connectors through holes as indicated (Fig. 8A).
Once cables/connectors are fed through, reattach gasket to mounting plate.
Gasket*
Inside
Mounting Plate
Fig. 8A
Inside of
Door
DPS
(7900 series only)
Lock Body
Harness
Reader Harness
Through - bolt
Through - bolt
Cat 5e or higher cable from
hinge (with ground wire)
for IN220
8 Install Mounting Plate Assembly
3. Secure ground lug(s) with #6-32 machine screw (Fig.8B).
Fig. 8B
Ground wire for
IN220 (PoE)
