3
1-800-727-5477 • www.sargentlock.com
7800 and 8200 Series Mortise Lock
Installation Instructions
Used with VN1 Escutcheon Trim and V Series Indicators
Copyright © 2019, 2020, 2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or
in part without the express written permission of SARGENT Manufacturing Company is prohibited. Patent pending
and/or patent www.assaabloydss.com/patents.
A8260D 11/21
Indicator Variants
2
Depending on function and option ordered, indicators are provided in
the following variations, these instructions detail how to install with
cylinder, however other variations follow similar instructions. (Figure 1)
Contact factory for any questions.
Coin Turn
-
For
installation
on outside of
door.
Cylinder
-
For
installation
on inside or
outside of
door.
No input /
blank
- F
or
installation
on inside or
outside of
door.
Thumbturn
-
For installation
on inside of
door.
Figure 1
Lock set configuration
3
To set function of multi-function lock or to re-hand, see instructions on
lock body.
Rehanding indicator (if required)
4
Indicator spindle cams MUST be oriented correctly per lock function and
door mounting location. Verify hand and bevel of door. (Figure 2)
LH
Left Hand
Hinges Left
Open Inward
RH
Right Hand
Hinges Right
Open Inward
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
RHRB
Right Hand
Reverse Bevel
Hinges Right
Open Outward
Figure 2
Note:
Stand on outside of locked door when determining door hand.
Next, verify inside and/or outside indicators are handed correctly,
using Spindle Cam Position chart. (Figure 3) If they are handed
correctly, skip to Step 5 "Prepare Door".
If they are not handed correctly:
1. Remove retaining pad and spindle cam from assembly. (Figure 4)
2. Position spindle cam in correct direction for door hand. (Figure 3)
Important:
•
For thumbturn indicators, make sure thumbturn
is positioned in the 12 o’clock direction as
shown. (Figure 5)
3. Slide spindle cam post into correct slot of display slide. (Figure 4)
4. Re-seat retaining pad into original position.
5. Return indicator to the vacant/unlocked position for installation.
Scan this QR
code for the
Sargent Indicator
Handing Charts
Door Hand: RH / RHRB
Door Hand: LH / LHRB
Outside Indicator
Inside Indicator
Inside Indicator
Outside Indicator
Spindle Cam Position for Locks with Deadbolt (*and 56 function)
Door Hand: RH / RHRB
Door Hand: LH / LHRB
Outside Indicator
Inside Indicator
Inside Indicator
Outside Indicator
Spindle Cam Position for Locks without Deadbolt (*except 56 function)
Figure 3
Figure 4
Spindle
cam
Display
slide slot
Retaining
pad
Thumbturn
position
Figure 5
