1-800-727-5477 • www.sargentlock.com
A7668B 3/20
Copyright © 2009, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction
in whole or in part without the express written permission of SARGENT Manufacturing Company is
prohibited.
2
11 Line w/ SL- Option
Installation Instructions
Bored Lock
TOC
Table of Contents
1
Lock Body Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Security Attachment Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3
Lever Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
4
Cylinder Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Lock Body Assembly
1
1. Prep door, and install lock bearing and latch according to T-Zone Installation
Instructions A7469, steps 1through 5.
2. Complete assembly of lock with Security Lever Attachment, according to
the following steps.
Security Attachment Screw
2
1. Using screwdriver provided, unscrew the Security Attachment Screw from lever catch on the outside
sleeve.
IMPORTANT - Keep screw for reinstallation.
2. Install outside and inside sleeves and roses according to Installation Instructions A7469, steps 6 & 7.
3.
PLEASE NOTE - THE CAM IN THE OUTSIDE SLEEVE MUST BE ROTATED SO THE LARGE SLOT IS
HORIZONTAL . THIS ALLOWS THE SECURITY SCREW TO THREAD INTO THE CAM .
Insert the Security Attachment Screw into black lever catch assembly and tighten until screw head is
within approximately 1/8” of black lever catch.
DO NOT OVER TIGHTEN .
