5
Copyright © 2021 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
A8286 04/21
10X Line
Installation Instructions
Cylindrical Lockset
11
Other Instructions
a
Remove Outside Lever for Exit Latch 10XG13
1. Remove inside lever (See Section 9).
2. Remove rose.
3. Remove (2) mounting screws and inside housing assembly. See Figure 16.
4. Remove outside trim assembly.
5. Push and hold plug back (located inside of outside trim assembly). See Figure 17.
6. Push lever catch with push pin and remove lever.
Remove
Push
Push and Hold Plug
(2) Mounting Screw
Inside Housing Assembly
Lever
Rose
Outside Trim Assembly
Figure 16
Figure 17
10
Timing 10XG26 & 10XG38
1. Remove outside and inside levers (See Section 9).
2. Adjust cams visible from both the outside and inside lock trim.
2a. Use a flat blade screwdriver to rotate each cam until the driver
points are in a 6 and 12 o’clock position. (See Figure 15)
3. Re-install outside and inside levers.
4. Test both cylinders with key before closing the door.
Figure 15
View into lock from
end of trim
12 o’clock drive point
6 o’clock drive point
