Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9370-0002-020 Rev 2 07/20
Model 704 Wave to Open Switch
1-3/4" Wide Jamb Mounting
Installation Instructions
1/8"
Bit
Phillips
Drive Bit
Drill
Step
Bit
Flat Head
Screwdriver
Phillips Head
Screwdriver
Safety Glasses
Center
Punch
Pencil
Deburring
Tool
Wire Stripper/
Cutter
Tape Measure
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
WARNING
Components
Supplied Fasteners
Tools Needed
Conduit supplied by others
This unit is not supplied with a radio frequency transmitter.
If a transmitter is added, a deeper surface mounted box,
supplied by others, will be needed.
2x
M3 x 8.3mm Philips
Flat Head Machine
Screw
4x
#8 Phillips Round
Head Metal
Drilling Screw
Conduit
Housing
Wave to Open
Switch
M3 Screw
#8 Screw
Specifications:
Input Voltage: 12V to24VDC
SPDT Contact Rating: 2A @30VAC/VDC
Sensor Detection Range: Up to 4" (101mm)
Operating Temperature: -13° F to 131°F (-25°C to 55°C)
Current Draw: 50mA @12VDC, 65mA @24VDC
Approved 2020-07-09
