Page 3
80-9377-0601-020 (03-13)
3.
Mount closer on door.
(A drop plate is available for use on
doors having narrow top rails.) Power Adjustment Nut should
be away from hinge. Valves are
DOWN
for
Left Hand Door
.
Valves are
UP
for
RIGHT HAND DOOR
.
Right Hand Door Shown
4.
Place main arm on shaft
, aligning "S" mark on arm with
pinion flat on pinion shaft. Push down into position. Secure
with 1/4-20 x 1/2 (13) with hex head machine screw.
Main Arm Screw
5. With door closed, rotate arm away from hinge and align shoe
with mounting holes in frame. Fasten arm shoe to frame with
round head screws provided.
CAUTION: Closer arm is under spring tension and may be
difficult to rotate.
CAUTION:
Do not back valves out of closer or a leak will result!
6.
Make closer adjustments
(see back page) before installing
cover.
7.
Install Cover:
Screw Standoffs into holes in closer.
8. Fasten cover to closer with 4 #8-32 x 1/4 RHMS provided.
8-32 x 1/4 RHMS
(4 Req'd)
Screw Standoffs into
closer.
Installation Sequence
1. Use template on page 2 to locate holes on door and
frame:
4 on door for closer or backplate
2 on frame face for arm shoe.
2. Prepare door and frame for fasteners using chart above.
