manualshive.com logo in svg

Assa Abloy Norton 7500 Series, Installation Instructions Manual

Share
Download
Assa Abloy Norton 7500 Series Installation Instructions Manual Download Page 6

Copyright © 2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or 

in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

www.nortondoorcontrols.com

Norton Technical Product Support:

Monroe, NC 28112  USA

Phone: 800.438.1951 ext: 6030 

[email protected]

80-9377-3204-020

  Rev 1  05/19

7500H Parallel Arm Installation 

(Right Hand Shown) 

continued

7.   Set Hold Open.

5.   Place main arm on closer spindle as shown.

1st

3rd

3rd

2nd

RH: 

Clockwise 

to tighten.

LH: Counter 

clockwise to 

tighten.

2nd

1st

Keep door open in position 

until dial screw secures dial.

You’ve now installed the

 7500H Hold Open Closer - Parallel Arm. 

 

🛑

 

Go to page 2 for closer adjustments and cover installation. 

6.   Connect arms, preload and tighten 

set screw.

1st

2nd

3rd

5th

4th

By hand, 

position arm 

elbow to be 

1-1/2" from 

door face.

Rotating arm 

preloads closer 

spring power.

RH: Position flat at Y

LH: Position flat at Z

1st

2nd

Summary of Contents for Norton 7500 Series







Reviews:

No comments

Brands by name

Popular brands

Load more brands