background image

Copyright © 2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or 

in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9377-3204-020

  Rev 1  05/19

7500H

Non Handed Door Closer 

Regular Arm

Top Jamb Mount

Parallel Arm

With or without DA suffix (delayed action)

With or without M suffix (metal cover)

Hold Open Arm Models

Ce produit peut vous exposer au plomb qui, dans l’état de la Californie, 

est reconnu pour causer le cancer, des anomalies congénitales ou d’autres 

problèmes de reproduction. Pour plus d’informations, visitez:

www.P65warnings.ca.gov.

This product can expose you to lead which is known to the state of 

California to cause cancer and birth defects or other reproductive harm. 

For more information go to www.P65warnings.ca.gov.

WARNING

Regular Arm 

Top Jamb Mount 

*Included Components

Parallel Arm 

Optional Plates

Legacy Friction Hold Open Arm 

Right Hand Door - RH 

Left Hand Reverse - LHR

Left Hand Door - LH 

Right Hand Reverse - RHR

Right Hand Door - RH 

Left Hand Reverse - LHR

Left Hand Door - LH 

Right Hand Reverse - RHR

Note: Legacy FHO arm has 

installation orientation. 

See 80-9300-0003-000 for details. 

Tools Needed

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT
HAND
DOOR

RIGHT
HAND
DOOR

Right Hand

Reverse

Left Hand

Reverse

To Determine Your Hand of Door:

To Identify Your Model:

Standard 7500 = 4 valves

Delayed Action 7500DA = 5 valves

Older models may 

be stamped “1-6”, 

“1-4” or “2-6”. They 

can be replaced 

with a newer “1-6” 

model which has 

no stamp.

Right Hand Door - RH 

Left Hand Reverse - LHR

Left Hand Door - LH 

Right Hand Reverse - RHR

Summary of Contents for Norton 7500 Series







Reviews: