internal software, all your settings will remain i.e. user Pin code and Key cards. This can be
pushed with a small
object i.e. pen. Once pressed you will hear confirmation. This is only ever used in the event
your lock malfunctions.
Passage Mode:
Enabling Passage mode allows continuous entry for non-restricted traffic.
Passage mode is enabled
or disabled through feature programming. Refer to page 10 For more details.
Visitor PIN:
The Visitor PIN is a temporary code that expires after a period between 3-336
hours. This is ideal when a
plumber or an electrician requires access to your house for a few hours or when your
neighbour is looking after
your home for up to 2 weeks. All you have to do is program the PIN and the duration . Time
may vary up to 10%,
refer to page 10 for more details.
Volume adjustment:
You have 3 levels of volume adjustment, 1 – Silent 2 – Medium 3 –
Loud (3-Factory default)
Silent Mode: Enabling Silent mode shuts off the code confirmation tone playback for use in
quiet areas.
Status LED:
Located on inside escutcheon indicated red when powered up.
7
EZ mode allows for a single User PIN Code to be assigned.
Up to 20 Key Cards can be programmed into the 001 Touch in this mode.
With the use of the User PIN Code a number of basic functions outline on page 10 can be
accessed.
A User PIN Code between 4 to 12 digits can be entered.
For programming new User PIN Code in EZ mode refer to the next page.
* - These values cannot be changed.
EZ Mode Functions
To set EZ Mode slide
switch to EZ followed by
the soft rest
Factory Defaults
~
U
V
U
Programming Features
Menu & Icons
8
*
*
*
User PIN Code
Registration User PIN code or
Key Cards in EZ Mode
Enter User PIN code. Can be 4 to 12 digits
in length. Factory default: 1234567890
Enter user Key Card(s). Up to 20 cards.
Keypad Programming - EZ Mode
U
U
U
wait for confirmation beep.
Present Key Card(s)
BEEP
1 2 3
