18
LCU9101
If you don’t know if the server name “arx” is added in the register
of the DNS server or not, you can contact the network
administrator and ask for help.
You can also check it yourself by “pinging” the computer name
“arx”. You do this in a command window by typing:
ping arx
.
(To open a command window in Windows:
Start
>
Program
>
Accessories
>
Command prompt
.)
Example ”ping arx”
Check list
For an automatic configuration, follow these steps:
Start the server application ARX ACCESS Server, if it isn’t running
already.
Connect the control unit to the network by connecting a network
cable to the Ethernet contact on the CPU board.
Connect a suitable power source to the “AC/DC” inputs.
The
WDOG
LED flashes slowly when the control unit is starting up
and flashes faster when the control unit is running.
The yellow LED (marked
A
) next to the
WDOG
diode flashes when
the control unit is trying to get in contact with the server. This
can take a couple of seconds. When the control unit has
established contact with the server the yellow
A
diode is lit.
The automatic configuration of the control unit is now finished.
You can now, for example, enter the client software ARX Client
and add the configured control unit to your installation. If
everything worked out well at the configuration the symbol for
the control unit (LCU) will turn green in the installation tree.
(For further information regarding the client software, we reefer
to “
ARX ACCESS User guide
”.)
If something goes wrong during the configuration according to
above, see further information in the section
Troubleshooting
.
Summary of Contents for LCU9101
Page 4: ...4 LCU9101 LCU9101 ...
