20
Alarms and messages
EN
Alarms
Acoustic alarm
There are alarm statuses where an audible signal is activated, such as a pre-alarm.
The acoustic alarm takes place for a configured time span and is automatically
switched off again, or can be switched off with a control command. If another
alarm should occur, the acoustic alarm is restarted.
Pre-alarm and alarm
The pre-alarm is triggered if the open door is not closed and locked within a
configured time span after the temporary release. The pre-alarm is signalled in
multiple ways: via the display of the
ePED
®
1386D10 door terminal
, acoustically
and via the yellow flashing ring.
The pre-alarm is switched off automatically if the door is closed and locked within
the pre-alarm time.
If the door is not closed and locked within the pre-alarm time, a tamper alarm is
triggered.
Fire alarm
In the case of a fire alarm, the
Hi-O-Technology
™ components are actuated by a
fire alarm system. The escape route locking systems are automatically unlocked
and retain this status until actuation by the fire alarm system is lifted again.
If the actuation by the fire alarm system is lifted again, the components lock again
if no further release commands are issued.
Other
Hi-O-Technology
™ locking systems respond according to their respective
configuration.
Emergency unlocking
If the Emergency Open push-button is pressed, an Emergency unlocking or
release request is issued to the central control. If an Emergency unlock has been
triggered with an Emergency Open push-button, the Emergency Open push-but-
ton must be unlocked manually, wherein the system is also reset to normal
operation.
Pre-alarm
Fire alarm
and/or Emergency
unlocking
Alarms and messages
