13
ED8400 Series
Installation Instructions
Vertical Rod Exit Devices
FM22 06/19
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2011, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
4
Remove and Reinstall Cylinder In Knob
Remove Knob:
1. Insert key in cylinder and turn 90° clockwise.
2. Insert knob removing tool into the hole in the knob and depress the knob catch button.
3. While knob catch button is depressed, pull knob off.
Remove Cylinder From Knob:
1. Remove sleeve.
2. Remove key.
3. Slide cylinder out of knob.
Figure 18
Here
Key
Knob
Cylinder
Sleeve
Knob
Catch
Button
Here
Knob Catch Hole
Removing
Tool
Or
(The knob catch button will
be in one of these positions.)
Reinstall Cylinder in Knob:
1. Slide cylinder into knob.
2. Replace sleeve.
Reinstall Knob
1. With key inserted part way into cylinder slide knob onto knob shank.
2. Depress knob catch button and push knob onto the knob shank as far as it will go.
3. Insert key completely into the cylinder and turn key while pushing on the knob until it engages the
knob catch button.
4. Return key to its vertical position and remove it.
5. Pull on the knob to be certain it is properly engaged to the knob catch button.
