11
ED8400 Series
Installation Instructions
Vertical Rod Exit Devices
FM22 06/19
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2011, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
3
Installation (cont .)
j
Install and Adjust Bottom Rod
Attach bottom rod to bar assembly by slipping hole over stump and secure rod by means of "E" ring. Shut
door. Dog down active case. Insert pin into rod connector. Turn adjustable rod connector by turning
clockwise or counter clockwise until latch bolt just clears strike. Undog device.
Caution
Make certain "E" ring engages slot in stump.
Figure 15
Latch Bolt
Stump
"E" Ring
Bottom Rod
Bottom
Rod
Bottom
Rod
Attach to Latch
Mechanism
Bolt Just Clears Strike
Attach to Bottom Latch
Strike
Door
Pin
Pin
k
Mount Top and Bottom Latch Covers
Bottom Cover
Position above bottom latch frame and align with hole in slide assembly at bottom. Secure with furnished
screw.
Top Cover
Position and secure with screw through bottom hole in top latch frame.
Figure 16
Cover Screw
Cover Screw
Spring
Top Latch Cover
Bottom Latch Cover
Cover
Cover
