7
ED8200 Series
Installation Instructions
Low Profile Rim Exit Devices - Reversible
FM37 04/20
Copyright © 2011, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Fold toward you on this
line and place this edge
against face of stop.
FOR LHR DOOR
Line up
with centerline
marked on
door
Strike For
Rim Device Only
KNOB TRIM
AND ANSI CUTOUT
(5/8" Stop)
FACE OF STOP
C
L
C
L
CYL
FOR RHR DOOR
Bore 2-1/8" dia. hole
thru door only for
functions with knob trim.
IF PULL OR PLATE TRIM with
cylinder is used. Drill 1-5/16"
dia hole thru door for cylinder.
IF CYLINDER only is used,
drill 1-5/16" hole from inside of
door and 1-9/16" hole 1/8"
deep from outside of door.
CYLINDER HOLE
CAUTION
When installed with
removable mullion,
see instruction sheet
packed with mullion.
1) F
or Pull or Plate
Tr
im
2) F
or Knob
T
rim (standard) or no tr
im
REVIEW INST
ALLA
TION FORM P
A
CKED
WITH DEVICE BEFORE USING
THIS
TEMPLA
TE
MOUNTING INSTR
UCTIONS
Dr
ill (2) 1/8" dia holes thr
u door
.
Spot (2) scre
w hole locations f
or br
ac
k
et scre
ws
.
