12
CL33600 Series Cylindrical Lock
Copyright © 2017 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
10. Connector Attachment (Interior PCB Assembly):
Fig. 11
a. Connect P3 (2-pin connector) from lockbody to J3
on interior PCB assembly.
b. Connect P4 (6-pin connector) from lockbody to J4
on interior PCB assembly.
c. Connect P5 (7-pin connector) from Reader board to J5
on interior PCB assembly.
d. Connect ElectroLynx harness (4 and 8-pin) from
door harness to ElectroLynx harness on
interior PCB assembly.
NOTE: Connectors go on only one way.
Do not offset connector and be sure
they are completely seated.
Fig. 10
From Reader
Board P5 to J5
From Lock
Body P3 to J3
From Lock
Body P4 to J4
To ElectroLynx Harness
J5
J3
J4
J2
J1
PCB Layout - Wire Assignments - ElectroLynx Assembly (Molex)
J2
J1
1-Violet Lock Neg
(Solenoid, neg)
3-Pink
N/A
1- Black
PWR NEG
3-White
DATA 1
5-Orange
RX (NO)
7-Brown
EGND
2-Gray Lock Pos
(Solenoid, pos)
4-Tan
N/A
2-Red
PWR POS
4-Green
DATA 0
6-Blue
RX (COM)
8-Yellow
LED
11. Install Inside Escutcheon, Lever, and Rose:
a. Plug in connectors according to instructions
in previous instruction.
b. Feed excess wires into door prep.
c. If this is an outside opening: Remove adhesive
backing and apply gasket to escutcheon.
d. Install two #8-32 x 5/8” oval head screws
through escutcheon.
Note: Be careful not to pinch wires under
escutcheon when tightening screws).
e. Attach inside rose to inside spring cassette.
f. Slide lever handle onto lock body and
be sure it snaps into place.
Inside Face of Door
Notes:
Please follow these steps prior to installing inside escutcheon assembly.
1. Insert the ElectroLynx® connectors (8 and 4 Pin) and establish their position inside of the door prep.
2. Fold the wires onto themselves and into the space left inside the door preparation.
3. Be sure to neatly fold the wires into available space inside
the door after placing the ElectroLynx connectors
to prevent pinching of wires when mounting escutcheon.
8-pin
ElectroLynx
4-pin
ElectroLynx
