ASSA AB 091189
Utgåva / Edition 5
Sida / Page 9 / 15
160824
1.
Install the lock case. The six-sided follower shall
be turned against the panic device. The gap
between door and frame shall be 1-3 mm to
insure a proper function.
Install the strike plate.
Make sure that the latches and the strike plate are
well lubricated and operate smoothly.
1.
2. Outside cylinder is fixed by four high security bolts
through the round mounting piece.
The two steering pins are, if necessary, cut according to
the table below and pressed into the mounting piece.
3. Cut the inside cylinder follower according to the table
below. Attach the cylinder to the central unit bottom
plate with two 13 mm screws.
