background image

3

AH40 - FCC and ISED Canada Statements

FCC Statements

Changes or modifications to the equipment not expressly approved by the 

party responsible for compliance could void the users authority to operate the 

equipment.

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) This device must accept any interference received, including interference 

that may cause undesired operation.

Note

: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio fre-

quency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no  

guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is  

encouraged to try to correct the interference by one of the following measures:

-  Reorient or relocate the receiving antenna. 

-  Increase the separation between the equipment and receiver. 

-  Connect the equipment into an outlet on a circuit different from that to  

  which the receiver is connected. 

-  Consult the dealer or an experienced radio/TV technician for help. 

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an 

uncontrolled environment. The device and its antenna must not be co-located or 

operating in conjunction with any other antenna or transmitter.

ISED Canada Statements

This radio transmitter [IC:9504A-AH40R03] has been approved by Innovation, 

Science and Economic Development Canada to operate with the antenna types 

listed below, with the maximum permissible gain indicated. Antenna types not 

included in this list that have a gain greater than the maximum gain indicated 

for any type listed are strictly prohibited for use with this device.

 

Antenna type 

Maximum antenna gain (dBi)  Impedance (ohm)

Internal antenna 

3.6 

 

 

50

AH-ANTENNA-1 2.15   

 

50

 

Summary of Contents for Aperio AH40













Reviews: