
11
Physical Dimensions 82 mm x 82 mm x 37 mm (H x W x T)
Power Supply
8-24 VDC or Power over Ethernet (PoE)
Power Rating
The power supply shall be able to deliver minimum
1.2 W and be 3 A over current protected. Wire
requirements 16-22 AWG.
PoE
IEEE 802.3.af compliant
class 1 Powered device (PD)
Ethernet
10BASE-T / 100BASE-TX Local Area Network
Radio Standard
IEEE 802.15.4 (2400 – 2483,5 MHz)
16 channels (11-26)
AES 128 bit encryption
Receiver Sensitivity
-100 dBm
Wireless Transmit
Power
10 dBm/MHz. Peak value from average detector
according to EN ETSI 300 328 Maximum spectral
density.
Wireless Operating
Range
Indoors up to 25 m depending upon installed
environment.
Internal Antenna
Two port cross polarized patch antenna.
External Antenna
One reverse polarity SMA external antenna
connector. AH40 is certified to be used with ASSA
ABLOY external antenna AH ANTENNA 1. If other
external antenna is used it must be of same type
(dipole) and not have larger antenna gain than
3.6 dBi.
Operating
Temperature
5 °C to 35 °C
Humidity
< 95 % non-condensing
IP Classification
IP20
Safety, Radio and
EMC
IEC 62368-1:2014
EN 62368-1:2014 + A11:2017
UL/CSA 62368-1:2014
EN 301 489-1 V2.1.1
EN 301 489-17 V3.2.0
EN 300 328 V2.2.2
EN 50130-4:2011 + A1:2014
EN 62311
FCC 47CFR Part 15 subpart B and subpart C
ISED RSS-247 and ICES-003
AS/NZS 4268
AH40 - Technical Data