Assa Abloy Alarm Controls KP-300, Operating Instructions Manual

Page: 5 / 12

5
1. Put the keypad in Program Mode by entering the Installer Code followed by
the “

”. The keypad will beep twice and the yellow LED will be on and not
blinking.
2. Enter “ (Output) (Code Number) # ”.
For example, if you wish to delete the User Code in Code Number “02” for
Output 1 you would enter “ 1 0 2 # ”.
If you wish to delete the User Code in Code Number “3” for Output 3 you
would enter “ 2 3 # ”.
3. Enter “

” to exit Program Mode. The yellow LED will begin blinking.
To delete all User Codes enter “ 8 9 0 1 # ”.
Enter a valid User Code to activate the associated Output. The keypad must be
in standby mode (yellow LED blinking).
1. Enter “
(User Code) # ”.
For example, if the User Code is “1234” you would enter “ 1 2 3 4 # ”.
OPERATION
DELETING USER CODES
The keypad can be programmed to be disabled for 15 minutes after 5 successive
false code entries.
1. Put the keypad in
Program Mode by entering the Installer Code followed by
the “

”. The keypad will beep twice and the yellow LED will be on and not
blinking.
2. Enter “ 7 2 5 # ”.
3. Enter “

” to exit Program Mode. The yellow LED will begin blinking.
To disable the False Code Lockout feature -
1. Put the keypad in Program Mode by entering the Installer Code followed by
the “

”. The keypad will beep twice and the yellow LED will be on and not
blinking.
2. Enter “ 7 6 0 0 # ”.
3. Enter “

” to exit Program Mode. The yellow LED will begin blinking.
FALSE CODE LOCKOUT
The keypad will generate an alarm instantly if the door is opened without a valid
User Code or Egress Input. The alarm will last for 60 seconds. Door position is
monitored via the
Door Position Sensor Input . The alarm will be turned off
immediately with any valid Output 1 User Code entry.
1. Put the keypad in Program Mode by entering the Installer Code followed by
the “

”. The keypad will beep twice and the yellow LED will be on and not
blinking.
2. Enter “ 8 0 1 # ”.
3. Enter “

” to exit Program Mode. The yellow LED will begin blinking.
DOOR FORCED OPEN ALARM