RIM Exit Device Application – 3090P-01 & 3090C-01 for 8700/8800
•
On the back side of the exit device, remove only the
lower Phillips head screw, depending on hand of door,
to free up the cylinder actuator for use. (Fig. 9)
Fig. 9
C
YLINDER
A
CTUATOR SCREW
MS1850 Application – 3090P-02 & 3090C-02 for MS
®
Series Deadbolt
•
Two (2) brass hex head screws and the set screw
from the MS1850 will fasten the cam plug to the
MS1850. (Fig. 10)
•
For MS
®
Deadbolt, insert Cam Plug into lock case
with notch on the cam plug aligned with lock case
setscrew.
•
Tighten setscrew and secure with the two (2) brass
cam plug screws. Cam Plug must be positioned
below door surface.
Fig. 10
9
80
‐
0180
‐
327
Rev.
A
