4
R
EN 179: 2008
3 7 6 B 1 3 4 2 A B/D Exit (EL587)
EN 1634-1
Fire
EN 61000-6-1:2007
EMC
EN 61000-6-3:2007
EMC
EN 12209: 2004
Mechanical strength
C
A(IN)
B(OUT)
40 - 54 mm
47 mm
50 mm
8 mm EA288 001000
47 - 66 mm
57 mm
50 mm
8 mm EA288 002000
61 - 80 mm
67 mm
60 mm
8 mm EA288 003000
66 - 80 mm
74 mm
50 mm
8 mm EA288 004000
88 mm -
120 mm 120 mm 8 mm EA288 005000
70 - 87 mm
90 mm
50 mm
8 mm EA288 006000
B
A
C
Funktions muligheder i låsekassen:
Mekaniske funktioner
- Falleretning (H/V) og fallefremspring
(14 mm / 20 mm EL587, EL588)
- Ændring af den aktive håndgrebsside (EL587)
Elektrisk funktion
-strømmen er på = retvendt funktion - låsen åbner
-strømmen er på = omvendt funktion - låsen åbner ikke
Låsen kan altid åbnes med den aktive sides greb (EL587)
Indikeringer:
-information om fallens position
-når dørgrebet trykkes ned
På denne type låsekasse anbetales det at anvende returtieder på
begge sider at røgrebene.
I branddøre skal fallefremspringet indstilles til 14 mm (fabriks
indstilling 20 mm).
Selectable functions of the lock case:
Mechanical functions
-opening directions of trigger bolt and latch bolt
-bolt throw (14 mm / 20 mm EL587, EL588)
-controlled side (EL587)
Electrical function
-power on -> controlled handle opens the lock
or
-power on -> controlled handle does not open the
lock
The lock can always be opened with the handle on the
active side (EL587).
Indications:
-deadlock status of latch bolt
-indication of handle operation
Use handles with return springs on both sides of the door.
In fire doors please use 14mm bolt throw (factory setting
20 mm).
UK
DK
ABLOY ® EL587 / EL588 lock cases are ASSA ABLOY Hi-O
Technology™ certified products.
Hi-O Technology™
Hi-O (Highly Intelligent Opening) is a standardized new technology
for security and control of door environments. Hi-O enables
interconnectivity - communication capabilities between all the
devices involved in a door environment. All devices have a built-
in micro processor and can communicate with each other over a
CAN network. CAN network enables plug-and-play installation,
synchronizes the door operation and monitors door environment.
Hi-O is used to reduce wiring, to increase flexibility and to simplify
retrofitting with new devices. Because of its intelligent message
transfer Hi-O also increases the security of the door environment.
Hi-O complies with the CiA Standard „Building Door Control“
DSP416.
