18
EN
Set-up operation
FT Manager
Connection to service PC
The network connection between the
TSB Controller
and a service PC is estab-
lished using a cross-over cable.
The escape route technology is configured under Windows
®
10 using
FT Manager
and a web browser.
System settings
The system settings on the controller, such as TCP/IP address assignment, are
made via the
FT Manager
’s web interface.
Configuring the network connection
You need to check the LAN settings on the network card and adjust if necessary to
ensure that the
TSB Controller
can communicate with your PC.
The bus controller’s DHCP server is active ex works.
1 Open
the
Windows settings
window (Fig. 4 –
1
).
2 Click
Network and Internet
(–
2
).
The
Settings
window opens.
3 Click
Change adaptation options
(–
3
).
4 Double-click
on
Ethernet
(–
4
).
5 Click
on
Properties
(–
5
). Depending on the configuration of your PC, you
may need to confirm your authorization with a password.
6 Select
Internet Protocol version 4 (TCP/IPv4)
(–
6
) and confirm with
OK
.
7 Select the options
Obtain IP address automatically
and
Obtain DNS server address automatically
(–
7
) and confirm with
OK
.
The network connection is configured.
FT Manager
System
settings
