2800 Series
1800 Series
1370 Series
1360 Series
1420 Series
1220 Series
MOUNTING INSTRUCTIONS
LOCKWOOD COMMERCIAL DOOR FURNITURE
Product ranges applicable:
P/No. 1220-221 - 0321
1 Set Door Furniture Handing
INSIDE
OUTSIDE
LEFT
HAND
LOCK
RIGHT
HAND
LOCK
INSIDE
OUTSIDE
LEFT
HAND
LOCK
RIGHT
HAND
LOCK
HAND OF DOOR ACCORDING TO ENGLISH PRACTICE
DOOR OPENING OUT
DOOR OPENING IN
B
3570 SYNERGY SETTING AND HANDING
A
3770 SELECTOR SETTING AND HANDING
SCREW REQUIRED TO SET FOR 3770 SELECTOR
SCREW REQUIRED TO SET HANDING
SET FOR LEFT HAND 3770
SET FOR RIGHT HAND 3770
45°
rotation
45°
rotation
ONE SCREW REQUIRED TO SET HANDING
SET FOR LEFT HAND 3570
SET FOR RIGHT HAND 3570
90°
rotation
90°
rotation
If mounting a plate with a disabled accessible turn, the turn will need to be configured
according to the mortice lock in use.
1.
Refer to the images below to identify the mortice lock in use.
2.
Position the screws according to the turn setting required.
Selector configurations should allow 45° rotation,
Synergy configurations should rotate to 90°.
Use images below as a guide.
SELECTOR MORTICE LOCK
SYNERGY MORTICE LOCK
Stainless
steel plate
Narrow
auxiliary bolt
Wide
auxiliary bolt
Plain case
‘3570 Series’
‘3770 Series’
2 Configuring Disabled Accessible Turn
Stop screws are supplied in an accessory packet
in the box.
For handing of furniture with non-handed levers or
knobs, position the handle by rotating it 180° to suit the
door LH or RH then insert the 4mm stop screw to suit.
Verify the correct handing of furniture on the door required.
Lever should rotate downwards.
1220 & 1420
LH
RH
180°
Stop
screw
1360 & 1370
LH
RH
180°
Stop
screw
1800 & 2800
LH
RH
180°
Stop
screw
Spindle
(supplied with lock
or tubular latch)
