ASROCK X299 Steel Legend User Manual Download Page 90

Page: 90 / 112

English

PCIE3 Link Speed

Select the link speed for PCIE3.

PCIE4 Link Speed

Select the link speed for PCIE4.

PCIE5 Link Speed

Select the link speed for PCIE5.

PCIE ASPM Support

This option enables/disables the ASPM support for all CPU downstream devices.

PCH PCIE ASPM Support

This option enables/disables the ASPM support for all PCH PCIE devices.

PCH DMI ASPM Support

This option enables/disables the ASPM support for all PCH DMI devices.

Onboard LAN

Enable or disable the onboard network interface controller.

Inte(R) Ethernet Connection I211

Enable or disable the onboard network interface controller (Intel® I211).

Onboard HD Audio

Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel

Enable/disable front panel HD audio.

Onboard WAN Device

Enable/disable the

nboard WAN device.

WAN Radio

Enable/disable the WiFi module's connectivity.

Bluetooth

Enable/disable the Bluetooth's connectivity.

Summary of Contents for X299 Steel Legend

















































































































Search results

Summary of Contents for X299 Steel Legend

Reviews:

Brands by name

Popular brands

ASROCK X299 Steel Legend, User Manual

Search results

Summary of Contents for X299 Steel Legend

Reviews:

Brands by name

Popular brands