manualshive.com logo in svg

ASROCK X299 Steel Legend, User Manual

Share
Download
ASROCK X299 Steel Legend User Manual Download Page 24

English

18

2.4  Expansion Slots (PCI Express Slots)

There are 5 PCI Express slots on the motherboard.

PCIe slots: 

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards. 
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x4 lane width graphics cards.  
PCIE3 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.  
PCIE4 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards. 
PCIE5 (PCIe 3.0 x16 slot) is used for PCI Express x8 lane width graphics cards.  
* If you install CPU with 48 lanes, PCIE1/PCIE2/PCIE3/PCIE5 will run at x16/x4/
x16/x8. 
* If you install CPU with 44 lanes, PCIE1/PCIE2/PCIE3/PCIE5 will run at x16/x4/
x16/x8. 
* If you install CPU with 28 lanes, PCIE1/PCIE2/PCIE3/PCIE5 will run at x16/x4/
x8/x0.

PCIe Slot Configurations (For CPU with 48 PCIe lanes)

Before installing an expansion card, please make sure that the power supply is switched off 
or the power cord is unplugged. Please read the documentation of the expansion card and 
make necessary hardware settings for the card before you start the installation.

PCIE1

PCIE2

PCIE3

PCIE5

Single Graphics Card

x16

N/A

N/A

N/A

Two Graphics Cards in 

CrossFireX

TM

 or SLI

TM

 

Mode

x16

N/A

x16

N/A

Three Graphics Cards in 

3-Way CrossFireX

TM

 Mode 

or 3-Way SLI

TM

 Mode

x16

N/A

x16

x8

Summary of Contents for X299 Steel Legend

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands