2 3
2 3
2 3
2 3
2 3
2.8 Onboard Headers and Connectors
2.8 Onboard Headers and Connectors
2.8 Onboard Headers and Connectors
2.8 Onboard Headers and Connectors
2.8 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
•
Primary IDE connector (Blue)
(39-pin IDE1, see p.12 No. 8)
Note: Please refer to the instruction of your IDE device vendor for the details.
Serial ATAII Connectors
These four Serial ATAII (SATAII)
(SATAII_1 (PORT 0):
connectors support SATAII
see p.12, No. 15)
or SATA hard disk for internal
(SATAII_2 (PORT 1):
storage devices. The current
see p.12, No. 14)
SATAII interface allows up to
(SATAII_3 (PORT 2):
3.0 Gb/s data transfer rate.
see p.12, No. 13)
(SATAII_4 (PORT 3):
see p.12, No. 9)
connect the black end
to the IDE devices
connect the blue end
to the motherboard
IDE1
PIN1
80-conductor ATA 66/100/133 cable
SATAII_1
(PORT 0)
SATAII_3
(PORT 2)
SATAII_2
(PORT 1)
SATAII_4
(PORT 3)
Serial ATA (SATA)
Either end of the SATA data cable
Data Cable
can be connected to the SATAII /
(Optional)
SATA3 hard disk or the SATAII /
SATA3 connector on this
motherboard.
Serial ATA3 Connectors
These two Serial ATA3
(SATA3_1: see p.12, No. 11)
(SATA3) connectors support
(SATA3_2: see p.12, No. 10)
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
SATA3_1
SATA3_2
