ASROCK P43C-ME, Installation Manual

Page: 8 / 123

8 88
88
ASRock P43C-ME Motherboard
EnglishEnglishEnglishEnglishEnglish
CAUTION!
1. This motherboard supports native FSB1600/1333/1066/800 MHz. For nor-
mal operation, you do no need to adjust the jumper settings. For special
overclocking mode, please refer to page 18 for proper jumper settings.
2. About the setting of “Hyper Threading Technology”, please check page 43
of “User Manual” in the support CD.
3. This motherboard supports Untied Overclocking Technology. Please read
“Untied Overclocking Technology” on page 24 for details.
4. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 14 for proper installation.
5. Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency Memory Support Frequency
1600 DDR3 800, DDR3 1066, DDR3 1333,
DDR3 1600 *
DDR2 800, DDR2 1066, DDR2 1200 *
1333 DDR3 800, DDR3 1066, DDR3 1333
DDR2 667, DDR2 800, DDR2 1066,
DDR2 1200 *
1066 DDR3 800, DDR3 1066
DDR2 667, DDR2 800, DDR2 1066
800 DDR3 800
DDR2 667, DDR2 800
* DDR3 1600 / DDR2 1200 memory modules will operate in overclocking
mode. In this situation, you need to adjust the BIOS option “DRAM
Frequency” to [800MHz DDR3_1600] or [600MHz DDR2_1200] and
adjust the jumpers. Please refer to page 17 for proper jumper settings.
6. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows ® 7 /
Vista
TM
/ XP. For Windows
®
OS with 64-bit CPU, there is no such limitation.
7. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 3 for
proper connection.
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
- EuP Ready (EuP ready power supply is required)
(see CAUTION 16 )
* For detailed product information, please visit our website: http://www.asrock.com