ASROCK K10N750SLI-WIFI, User Manual

Page: 39 / 264

3 9 3 9 3 9 3 9 3 9
ASRock K10N750SLI-WiFi Motherboard
EnglishEnglishEnglishEnglishEnglish
Please select A and B for Windows ® XP / XP 64-bit in RAID mode. (There are two RAID
drivers needed for RAID mode, you have to select them separately. Please specify the
first RAID driver and then specify again for the second one.)
NOTE. If you install Windows
®
XP / Windows
®
XP 64-bit on IDE HDDs and want to manage
(create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs, you still
need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please set the
RAID configuration by using the Windows RAID installation guide part of the
document in the following path in the Support CD:
.. \ RAID Installation Guide
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
2.15.2 Installing Windows 2.15.2 Installing Windows
2.15.2 Installing Windows 2.15.2 Installing Windows 2.15.2 Installing Windows
®
Vista Vista
Vista Vista Vista
TM TM TM TM TM / Vista / Vista
/ Vista / Vista / Vista
TM TM TM TM TM 64-bit With 64-bit With
64-bit With 64-bit With 64-bit With
RAID F RAID F
RAID F RAID F
RAID Functions unctions
unctions unctions
unctions
If you want to install Windows ® Vista TM / Windows ® Vista TM 64-bit on your SATA / SATAII
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [RAID].
STEP 2: Use “RAID Installation Guide” to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Vista
TM
/ Vista
TM
64-bit OS on your system.
Insert the Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit optical disk into the optical drive
to boot your system, and follow the instruction to install Windows ® Vista TM / Windows ®
Vista TM 64-bit OS on your system. When you see “Where do you want to install Windows?
” page, please insert the ASRock Support CD into your optical drive, and click the “Load
Driver” button on the left on the bottom to load the NVIDIA ® RAID drivers. NVIDIA ® RAID
drivers are in the following path in our Support CD:
.. \ I386 \ Vista32_RAID (For Windows ® Vista TM OS)
.. \ AMD64 \ Vista64_RAID (For Windows ® Vista TM 64-bit OS)
After that, please insert Windows ® Vista TM / Windows ® Vista TM 64-bit optical disk into
the optical drive again to continue the installation.
NOTE. If you install Windows ® Vista TM / Windows ® Vista TM 64-bit on IDE HDDs and want to
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide