iBOX-210
19
English
Digital Input/Output
PWR Select
(3-pin JGPIO_
PWR1)
(see p.15, No. 5)
1-2 : +12V
2-3 : +5V
ATX/AT Mode
Selection
(3-pin PWR_JP1)
(see p.15, No. 17)
1-2: AT Mode
2-3: ATX Mode
4.3 Jumpers Setup
he illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. he illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Clear CMOS Jumper
(CLRCMOS1)
(see p.15, No. 13)
CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn of the computer and unplug the power cord
from the power supply. Ater waiting for 15 seconds, use a jumper cap to short pin2
and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS
right ater you update the BIOS. If you need to clear the CMOS when you just inish
updating the BIOS, you must boot up the system irst, and then shut it down before
you do the clear-CMOS action. Please be noted that the password, date, time, and
user default proile will be cleared only if the CMOS battery is removed.
Clear CMOS
Default
Summary of Contents for iBOX-210
Page 1: ...iBOX 210 User Manual...
