ASROCK H77M-ITX User Manual Download Page 9

Page: 9 / 61

WARNING

Please realize that there is a certain risk involved with overclocking, including

adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using

third-party overclocking tools. Overclocking may affect your system’s stability, or

even cause damage to the components and devices of your system. It should be

done at your own risk and expense. We are not responsible for possible damage

caused by overclocking.

CAUTION!

1. About the settings of “Hyper Threading Technology”, please check page

43.

2. This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 20 for proper installation.

3. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

7 /

Vista

/ XP. For Windows

OS with 64-bit CPU, there is no such limita-

tion. You can use ASRock XFast RAM to utilize the memory that Win-

dows

cannot use.

4. To run the PCI Express in Gen 3 speed, please install an Ivy Bridge CPU.

If you install a Sandy Bridge CPU, the PCI Express will run only at PCI
Express Gen 2 speed.

5. The maximum shared memory size is defined by the chipset vendor and

is subject to change. Please check Intel

website for the latest informa-

tion.

6. You can choose to use two of the three monitors only. D-Sub, DVI-D and

HDMI monitors cannot be enabled at the same time. Besides, with the

DVI-to-HDMI adapter, the DVI-D port can support the same features as

HDMI port.

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU/Chassis Quiet Fan (Allows Chassis Fan Speed Auto-

Adjust by CPU Temperature)

- CPU/Chassis Fan Multi-Speed Control

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

- Microsoft

Windows

7 / 7 64-bit / Vista

/ Vista

64-bit /

XP / XP 64-bit compliant (see

CAUTION 21

)

Certifications

- FCC, CE, WHQL

- ErP/EuP Ready (ErP/EuP ready power supply is required)

(see

CAUTION 22

)

* For detailed product information, please visit our website: http://www.asrock.com

Summary of Contents for H77M-ITX





























































Search results

Summary of Contents for H77M-ITX

Reviews:

Related manuals for H77M-ITX

Brands by name

Popular brands

ASROCK H77M-ITX, User Manual

Search results

Summary of Contents for H77M-ITX

Reviews:

Related manuals for H77M-ITX

Brands by name

Popular brands