ASROCK H67M-GE/THW User Manual Download Page 32 | Manualshive

Page: 32 / 63

background image

32

2.10 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks Installation

This motherboard adopts Intel

®

H67 chipset that supports Serial ATA (SATA) / Serial

ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel
Rapid Storage) functions. You may install SATA / SATAII hard disks on this mother-
board for internal storage devices. This section will guide you to install the SATA /
SATAII hard disks.

STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII con-

nector.

STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard

disk.

2.11 Serial ATA3 (SATA3) Hard Disks Installation

This motherboard adopts Intel

®

H67 chipset that supports Serial ATA3 (SATA3)

hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel Rapid Storage)
functions. You may install SATA3 hard disks on this motherboard for internal storage
devices. This section will guide you to install the SATA3 hard disks.

STEP 1: Install the SATA3 hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA3 hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA3 con-

nector.

STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk.

«
...
30
31
32
33
34
...
»

Summary of Contents for H67M-GE/THW
































































Reviews:

No comments

Related manuals for H67M-GE/THW

Brand: ASROCK Pages: 80

Brand: AOpen Pages: 96

Brand: Intel Pages: 78

Brand: ST Pages: 9

Brand: Ublox Pages: 38

Brand: Xilinx Pages: 56

Brand: ASROCK Pages: 226

Brand: Gigabyte Pages: 81

Brand: EPOX Pages: 68

Brand: Supero Pages: 80

Brand: Embedian Pages: 70

Brand: Gigabyte Pages: 34

D850MV - Desktop Board Motherboard

Brand: Intel Pages: 25

Brand: EVGA Pages: 40

Brand: IEI Technology Pages: 53

Brand: Texas Instruments Pages: 21

Brand: Albatron Pages: 33

EVB-LAN9252-SPI

Brand: Microchip Technology Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands