ASROCK H310M-G/M.2 User Manual Download Page 60

Page: 60 / 81

English

H310M-G/M.2

4.6.1 CPU Coniguration

Intel Hyper Threading Technology

Intel Hyper hreading Technology allows multiple threads to run on each core, so that the

overall performance on threaded sotware is improved.

Active Processor Cores

Select the number of cores to enable in each processor package.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6

and C7 all enabled for better power saving.

Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.

CPU C6 State Support

Enable C6 sleep state for lower power consumption.

CPU C7 State Support

Enable C7 sleep state for lower power consumption.

Package C State Support

Enable CPU, PCIe, Memory, Graphics C State Support for power saving.

Summary of Contents for H310M-G/M.2


















































































Search results

Summary of Contents for H310M-G/M.2

Reviews:

Related manuals for H310M-G/M.2

Brands by name

Popular brands

ASROCK H310M-G/M.2, User Manual

Search results

Summary of Contents for H310M-G/M.2

Reviews:

Related manuals for H310M-G/M.2

Brands by name

Popular brands