ASROCK H310CM-HDVP/DASH User Manual Download Page 53

Page: 53 / 72

English

PCI Express Native Control

Select Enable for enhanced PCI Express power saving in OS.

PCIE ASPM Support

This option enables/disables the ASPM support for all CPU downstream devices.

PCH PCIE ASPM Support

This option enables/disables the ASPM support for all PCH PCIE devices.

DMI ASPM Support

This option enables/disables the control of ASPM on CPU side of the DMI Link.

PCH DMI ASPM Support

This option enables/disables the ASPM support for all PCH DMI devices.

Share Memory

Configure the size of memory that is allocated to the integrated graphics processor when
the system boots up.

IGPU Multi-Monitor

Select disable to disable the integrated graphics when an external graphics card is installed.
Select enable to keep the integrated graphics enabled at all times.

Onboard LAN

Enable or disable the onboard network interface controller.

Onboard HD Audio

Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel

Select Front Panel type.

Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.

Deep Sleep

Configure deep sleep mode for power saving when the computer is shut down.

Summary of Contents for H310CM-HDVP/DASH









































































Search results

Summary of Contents for H310CM-HDVP/DASH

Reviews:

Related manuals for H310CM-HDVP/DASH

Brands by name

Popular brands

ASROCK H310CM-HDVP/DASH, User Manual

Search results

Summary of Contents for H310CM-HDVP/DASH

Reviews:

Related manuals for H310CM-HDVP/DASH

Brands by name

Popular brands