ASROCK G41M-LE User Manual Download Page 7

Page: 7 / 118

ASRock G41M-LE Motherboard

EnglishEnglishEnglishEnglishEnglish

CAUTION!

This motherboard supports native FSB1333/1066/800 MHz. For

normal operation, you do not need to adjust the jumper settings. For

special overclocking mode, please refer to page 16 for proper jumper

settings.

About the setting of “Hyper Threading Technology”, please check page

31 of “User Manual” in the support CD.

This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 21 for details.

This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read

the installation guide of memory modules on page 13 for proper

installation.

Please check the table below for the CPU FSB frequency and its

corresponding memory support frequency.

CPU FSB Frequency

Memory Support Frequency

1333

DDR2 667, DDR2 800, DDR2 1066

1066

DDR2 667, DDR2 800, DDR2 1066

800

DDR2 667, DDR2 800

533

DDR2 533

DDR2 1066 memory modules will operate in overclocking mode.

If you adopt a DDR2 1066 memory module on this motherboard,

you need to adjust the jumpers. Please refer to page 16 for proper

jumper settings.

Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

and Windows

Vista

. For Windows

XP 64-bit and Windows

Vista

64-bit with 64-bit CPU, there is no such limitation.

The maximum shared memory size is defined by the chipset vendor

and is subject to change. Please check Intel

website for the latest

information.

Full HD 1080p Blu-ray (BD) / HD-DVD playback support requires the proper

hardware configuration. Please refer to page 9 for the minimum hardware

requirement and the passed Full HD 1080p Blu-ray (BD) / HD-DVD films in

our lab test.

WARNING

Please realize that there is a certain risk involved with overclocking, including

adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using

the third-party overclocking tools. Overclocking may affect your system stability, or

even cause damage to the components and devices of your system. It should be

done at your own risk and expense. We are not responsible for possible damage

caused by overclocking.

Summary of Contents for G41M-LE























































































































Search results

Summary of Contents for G41M-LE

Reviews:

Related manuals for G41M-LE

Brands by name

Popular brands

ASROCK G41M-LE, User Manual

Search results

Summary of Contents for G41M-LE

Reviews:

Related manuals for G41M-LE

Brands by name

Popular brands