ASROCK FM2A85X Extreme4-M User Manual Download Page 61

Page: 61 / 83

3.4.3 South Bridge Coniguration

Onboard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio

feature. If you select [Auto], the onboard HD Audio will be disabled

when PCI Sound Card is plugged.

Front Panel

Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.

On/Off Play

Use this item to enable or disable On/Off Play Technology. The

defaultvalue is [Enabled]. When On/Off Play is enabled, Deep Sx

will be disabled. If you want to enable Deep Sx, please disable

On/Off Play irst.

Onboard LAN

This allows you to enable or disable the onboard LAN feature.

Good Night LED

Enable this option to turn off Power LED when the system is pow-

er on. The keyboard LED will also be turned off in S1, S3 and S4

state. The default value is [Auto].

Summary of Contents for FM2A85X Extreme4-M



















































































Search results

Summary of Contents for FM2A85X Extreme4-M

Reviews:

Related manuals for FM2A85X Extreme4-M

Brands by name

Popular brands

ASROCK FM2A85X Extreme4-M, User Manual

Search results

Summary of Contents for FM2A85X Extreme4-M

Reviews:

Related manuals for FM2A85X Extreme4-M

Brands by name

Popular brands