FH-C612NM
22
23
English
2.6 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.7, No. 40)
Normal Mode (Default)
ME Recovery Mode
PMBUS Mode Jumper
(3-pin PMBUS_SEL_CLK1)
(see p.7, No. 55)
(3-pin PMBUS_SEL_DAT1)
(see p.7, No. 53)
(3-pin PMBUS_SEL_ALT1)
(see p.7, No. 56)
PMBus connected to BMC
(Default)
PMBus connected to PCH
Descriptor Security Over-
ride Jumper
(3-pin J100)
(see p.7, No. 39)
Descriptor Security Over-
ride
No Override (Default)
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.7, No. 13)
CPU PECI connected to
PCH
CPU PECI connected to
BMC (Default)
