E3C224D4HM / E3C224D4HM-8R
25
English
2.7 Expansion Slots (Mezzanine Card Slot and PCI Express
Slot)
here is 1 Mezzanine Card Slot and 1 PCI Express slot on this motherboard.
Mezzanine Card slot:
he mezzanine card slot (MEZZ_MB1) is used for mezzanine cards. (his Connector
follows Open Compute Mezzanine Card pin deinition, which provides further 10G
Ethernet support capability.)
PCIE slot:
PCIE1 (PCIE 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
Installing an expansion card
Step 1.
Before installing an expansion card, please make sure that the power
supply is switched of or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2.
Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4.
Align the card connector with the slot and press irmly until the card is
completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6.
Replace the system cover.
PCIE Coniguration for
E3C224D4HM-8R
The
PCIE1
slot shares lanes with the
MEZZ_MB1
and
LSI_SAS_0_3
/
LSI_SAS_4_7
slots.
PCIE1 Slot
MEZZ_MB1
LSI_SAS_0_3/_4_7
A
x16
Disabled
B
x8
x8
Disabled
C
x8
x8
D
x8
A. If you install a PCI Express x16 graphics card on the PCIE1 slot, the PCIE1 slot will
Summary of Contents for E3C224D4HM
Page 1: ......
Page 28: ...22 English 2 5 Installing the CPU Fan and Heatsink 1 2 1 2 C P U _ F A N...
Page 30: ...24 English 1 2 3...
