ASROCK C226 WS, User Manual

Page: 27 / 60

27
USB 3.0 Header Besides four default USB 3.0
(19-pin USB3_4_5)
ports on the I/O panel, there is
(see p.9, No. 8)
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
1
DUMMY
In
IntA_P1_D-
GND
IntA_
IntA_P1_SSTX-
GND
IntA_
IntA_P1_SSRX-
Vbus
In
IntA_P0_D-
GND
IntA_
IntA_P0_SSTX-
GND
IntA_
IntA_P0_SSRX-
Vbus
TPM Header This connector supports a
(17-pin TPMS1)
Trusted Platform Module (TPM)
(see p.9 No. 25)
system, which can securely
store keys, digital certificates,
passwords, and data. A TPM
system also helps enhance
network security, protects
digital identities, and ensures
platform integrity.
1
USB_PWR
P-8
GND
DUMMY
USB_PWR
P+8
GND
P-9
P+9
(9-pin USB8_9)
(see p.9, No. 21)
Front Panel Audio Header This is an interface for front
(9-pin HD_AUDIO1)
panel audio cable that allows
(see p.9, No. 27)
convenient connection and
control of audio devices.
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
1. High Definition Audio supports Jack Sensing, but the panel wire on the
chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.