33
(9-pin USB6_7)
(see p.13, No. 23)
Infrared Module Header
This header supports an
(5-pin IR1)
optional wireless transmitting
(see p.13, No. 27)
and receiving infrared module.
Consumer Infrared Module Header
This header can be used to
(4-pin CIR1)
connect the remote controller
(see p.13, No. 26)
receiver.
Front Panel Audio Header
This is an interface for front
(9-pin HD_AUDIO1)
panel audio cable that allows
(see p.13, No. 30)
convenient connection and
control of audio devices.
USB 3.0 Header
Besides two default USB 3.0
(19-pin USB3_2_3)
ports on the I/O panel, there is
(see p.13, No. 8)
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
1
In
Dummy
IntA_P3_D-
GND
IntA_
GND
IntA_P3_SSTX-
IntA_
IntA_P3_SSRX-
Vbus
Vbus
Vbus
IntA_P2_SSRX-
IntA_
GND
IntA_P2_SSTX-
IntA_
GND
IntA_P2_D-
In
DUMMY
GND
GND
P+7
P-7
USB_PWR
P+6
P-6
USB_PWR
1
1. High Definition Audio supports Jack Sensing, but the panel wire on the
chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
