ASROCK B450 Pro4 R2.0 User Manual Download Page 81

Page: 81 / 86

B450 Pro4 R2.0

English

AddOn ROM Display

Enable AddOn ROM Display to see the AddOn ROM messages or configure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.

Above 4G Decoding

Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space
(only if the system supports 64 bit PCI decoding).

CSM (Compatibility Support Module)

CSM

Enable to launch the Compatibility Support Module. Please do not disable unless
you’re running a WHCK test.

Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.

Launch Storage OpROM Policy

Summary of Contents for B450 Pro4 R2.0























































































Search results

Summary of Contents for B450 Pro4 R2.0

Reviews:

Related manuals for B450 Pro4 R2.0

Brands by name

Popular brands

ASROCK B450 Pro4 R2.0, User Manual

Search results

Summary of Contents for B450 Pro4 R2.0

Reviews:

Related manuals for B450 Pro4 R2.0

Brands by name

Popular brands