ASROCK ALIVESATA2-GLAN Page 27 User Manual Download

Page: 27 / 47

2 7

2.12.2 Installing Windows

Vista

/ Vista

64-bit With RAID

Functions

If you want to install Windows

Vista

or Vista

64-bit on your SATA / SATAII HDDs

with RAID functions, please follow below steps.

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

B. If you plan to install Windows

Vista

/ Vista

64-bit on VIA

SATA ports with

RAID functions, please set the “SATA Operation Mode” option to [RAID]. If you

plan to install Windows

Vista

/ Vista

64-bit on JMicron

SATAII ports with

RAID functions, please set the “PCIE-SATAII Operation Mode” option to [RAID].

STEP 2: Make a SATAII driver diskette. (For JMicron

SATAII ports in RAID

mode only.)

If you set “PCIE-SATAII Operation Mode” to [RAID] mode, and plan to install

Windows

Vista

/ Vista

64-bit on JMicron

SATAII HDDs, please refer to step 2

on page 25 for detailed procedures of making a SATAII driver diskette. Otherwise,

please skip this step.

STEP 3: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

Vista

/ Vista

64-bit OS on your system.

Insert the Windows

Vista

/ Vista

64-bit optical disk into the optical drive to boot

your system, and follow the instruction to install Windows

Vista

/ Vista

64-bit

OS on your system.

If you plan to install Windows

Vista

/ Vista

64-bit on VIA

SATA HDDs, when you

see “Where do you want to install Windows?” page, please insert the ASRock

Support CD into your optical drive, and click the “Load Driver” button on the left on the

bottom to load the VIA

RAID drivers. VIA

RAID drivers are in the following path in

our Support CD:

.. \ I386 \ NT5

(For Windows

Vista

OS)

.. \ AMD64 \ 2003x64

(For Windows

Vista

64-bit OS)

If you plan to install Windows

Vista

/ Vista

64-bit on JMicron

SATAII HDDs,

when you see “Where do you want to install Windows?” page, please click the

“Load Driver” button on the left on the bottom to load the JMicron

RAID drivers from

the SATAII driver diskette you just made.

After that, please insert Windows

Vista

/ Vista

64-bit optical disk into the optical

drive again to continue the installation.

Summary of Contents for ALIVESATA2-GLAN















































Search results

Summary of Contents for ALIVESATA2-GLAN

Reviews:

Related manuals for ALIVESATA2-GLAN

Brands by name

Popular brands

ASROCK ALIVESATA2-GLAN, User Manual

Search results

Summary of Contents for ALIVESATA2-GLAN

Reviews:

Related manuals for ALIVESATA2-GLAN

Brands by name

Popular brands