manualshive.com logo in svg

ASROCK ALIVESATA2-GLAN, User Manual

Share
Download
ASROCK ALIVESATA2-GLAN User Manual Download Page 26

2 6

2 6

2 6

2 6

2 6

If you want to use “VIA RAID Tool” in Windows

®

 environment, please install

SATA drivers from the Support CD again so that “VIA RAID Tool” will be

installed to your system as well. If you want to use “JMicron RAID Tool” in

Windows

®

 environment, please install SATAII drivers from the Support CD

again so that “JMicron RAID Tool” will be installed to your system as well.

NOTE. After the installation of Windows

®

 2000 / XP / XP 64-bit OS and RAID utility, if you

want to manage RAID functions, please refer to the Windows RAID installation

guide of the document in the following path in the Support CD:

.. \ RAID Installation Guide

E. The system will start to format the floppy diskette and copy SATA / SATAII

    drivers into the floppy diskette.

STEP 3: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

®

 2000 / XP / XP 64-bit OS on your system.

After making a SATA / SATAII driver diskette and set RAID configuration, you can

start to install Windows

®

 2000 / XP / XP 64-bit on your system. At the beginning of

Windows

®

 setup, press F6 to install a third-party RAID driver. When prompted, insert

the SATA / SATAII driver diskette containing VIA

®

 and JMicron

®

 RAID driver. After

reading the floppy disk, the driver will be presented. Select your required driver to

install according to the SATA / SATAII controller support vendor and the OS you

install. The driver options are as below:

1. VIA VT8251/8237/8237A/6421/6410 SATA RAID Controller (Windows XP/SRV2003)

2. VIA VT8251/8237/8237A/6421/6410 SATA RAID Controller (Windows 2K)

3. VIA VT8251/8237/8237A/6421/6410 SATA RAID Controller (Windows NT4)

4. JMicron JMB36X RAID Controller (Windows 2K/XP/2003)

5. JMicron JMB36X AHCI Controller (Windows 2K/XP/2003)

If you insert HDDs to VIA

®

 SATA connectors (black), please choose item 1, 2, or 3

according to the OS you install. If you insert HDDs to JMicron

®

 SATAII connectors

(red), please choose item 4. You can also specify twice to load both two drivers if

you plan to create RAID on two SATA HDDs and two SATAII HDDs, but please note

that the two SATA HDDs and two SATAII HDDs provide separated RAID functions.

Summary of Contents for ALIVESATA2-GLAN
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands