4 8
4 8
4 8
4 8
4 8
BIOS SETUP UTILITY
IDE Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
OnBoard IDE Controller
OnBoard SATA Controller
SATA Operation Mode
Primary IDE Master
IDE Slave
SATAII_BLACK
SATAII_ORANGE
SATAII_BLUE
SATAII_RED
Primary
Secondary IDE Master
Secondary IDE Slave
[Both]
[Enabled]
[non-RAID]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
DISABLED: disables the
integrated IDE
Controller.
Primary: enables only
the Primary IDE
Controller.
Secondary: enables only
the Secondary IDE
Controller.
Both: enables both IDE
Controllers.
3.3.4
3.3.4
3.3.4
3.3.4
3.3.4 IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
IDE Configuration
OnBoard IDE Controller
Use this item to enable or disable the “OnBoard IDE Controller” feature.
Configuration options: [Both], [Disabled], [Primary] and [Secondary]. The
default value is [Both].
OnBoard SATA Controller
Use this item to enable or disable the “OnBoard SATA Controller” feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [non-RAID]. If you want to operate RAID function on SATA / SATAII
HDDs, please select [RAID].
* If you select [RAID] mode, SATA / SATAII HDDs can not be accessed until you finish
configuring RAID functions in NVIDIA BIOS / Windows RAID Utility.
eSATAII Support
Use this item to enable or disable eSATAII support. This item appears only
when “SATA Operation Mode” is set to [RAID]. The default value is [Enabled].
Configuration options: [Enabled] and [Disabled]. If you set this item to
[Enabled], eSATAII ports cannot support RAID functions. If you set this item
to [Disabled], eSATAII ports can support RAID functions.
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction,
which can be applied to the configurations of “Primary IDE Slave”, “Sec-
ondary IDE Master” and “Secondary IDE Slave” as well.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
®
Vista
TM
certification.
