ASROCK ALIVENF5-ESATA2 PLUS - V1.0, Installation Manual

Page: 29 / 208

2 9 2 9 2 9 2 9 2 9
ASRock ALiveNF5- Motherboard
EnglishEnglishEnglishEnglishEnglish
Using SATA / SATAII HDDs and eSATAII devices without NCQ and Hot Plug
functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [non-RAID].
STEP 2: Install Windows ® Vista TM / Vista TM 64-bit OS on your system.
2.14 2.14 2.14 2.14 2.14 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
®
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
TM TM TM TM TM
/ Vista / Vista / Vista / Vista / Vista
TM TM TM TM TM
64-bit W 64-bit W 64-bit W 64-bit W 64-bit With RAID F ith RAID F ith RAID F ith RAID F ith RAID Functions unctions unctions unctions unctions
If you want to install Windows
®
2000, Windows
®
XP, Windows
®
XP 64-bit, Windows
®
Vista
TM
or Windows
®
Vista
TM
64-bit on your SATA / SATAII HDDs with RAID functions,
please follow below procedures according to the OS you install.
2.14.1 Installing Windows 2.14.1 Installing Windows 2.14.1 Installing Windows 2.14.1 Installing Windows 2.14.1 Installing Windows
®
2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID 2000 / XP / XP 64-bit With RAID
F F F F Functions unctions unctions unctions unctions
If you want to install Windows ® 2000 / Windows ® XP / Windows ® XP 64-bit on your SATA
/ SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.13.1 step 2 on
page 27.
install Windows?” page, please insert the ASRock Support CD into your optical drive,
and click the “Load Driver” button on the left on the bottom to load the NVIDIA ® AHCI
drivers. NVIDIA ® AHCI drivers are in the following path in our Support CD:
.. \ I386 \ Vista32_AHCI (For Windows ® Vista TM OS)
.. \ AMD64 \ Vista64_AHCI (For Windows ® Vista TM 64-bit OS)
After that, please insert Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit optical disk into
the optical drive again to continue the installation.
If you want to enable Hot Plug function on eSATAII ports but you install OS
on IDE HDD, please skip step 2.
Before installing Windows ® 2000 to your system, your Windows ® 2000 optical
disk is supposed to include SP4. If there is no SP4 included in your disk, please
visit the below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay