ASROCK ALIVENF5-ESATA2 PLUS - V1.0, Installation Manual

Page: 27 / 208

2 7 2 7 2 7 2 7 2 7
ASRock ALiveNF5- Motherboard
EnglishEnglishEnglishEnglishEnglish
2.13 2.13
2.13 2.13
2.13 Installing Windows Installing Windows
Installing Windows Installing Windows
Installing Windows
®
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
TM TM
TM TM TM
/ Vista / Vista
/ Vista / Vista
/ Vista
TM TM TM TM TM
64-bit W 64-bit W
64-bit W 64-bit W
64-bit Without RAID F ithout RAID F
ithout RAID F ithout RAID F
ithout RAID Functions unctions
unctions unctions
unctions
If you want to install Windows
®
2000, Windows
®
XP, Windows
®
XP 64-bit, Windows
®
Vista TM or Windows ® Vista TM 64-bit on your SATA / SATAII HDDs without RAID functions,
please follow below procedures according to the OS you install.
Before installing Windows ® 2000 to your system, your Windows ® 2000 optical
disk is supposed to include SP4. If there is no SP4 included in your disk, please
visit the below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay
2.13.1 Installing Windows 2.13.1 Installing Windows
2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows
®
2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
RAID F RAID F
RAID F RAID F RAID Functions
unctions
unctions unctions unctions
If you want to install Windows ® 2000 / Windows ® XP / Windows ® XP 64-bit on your SATA
/ SATAII HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C. When you see the message on the screen, “Generate Serial ATA driver
diskette [YN]?”, press <Y>.
D. Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for Windows2000/XP/XP64
2. Generate RAID Driver diskette for Windows2000/XP
3. Generate RAID Driver diskette for WindowsXP64
4. Exit
2.12 2.12
2.12 2.12
2.12 Driver Installation Guide Driver Installation Guide
Driver Installation Guide Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.