7
English
Step 1. Ins
of the CPU and CPU Cooler:
Hardware
Guide
Ins
Steps
Step 2.
of Memory Modules:
2-1. Unfasten the latches on each side
of the DIMM slots.
Step 3. Ins
of Motherboard:
3-1. Replace the back I/O plate of the
case with the I/O shield provided in
motherboard’s package.
2-2. Firmly press the DIMM down un l it
seats correctly. Make sure the slot
latches are levered upwards and latch
on the edge of the DIMM.
3-2. Place the motherboard within the
case by
it into the I/O plate.
Secure the motherboard to the case
with screws.
Step 4.
of an Expansion card:
Remove the metal located on the slot and then insert the expansion card into the
slot. Press the card
Į
rmly to make sure it is fully inserted into its slot. And then
return the screw back to its
.
Locate the CPU cut edge (the corner with
insert the CPU correctly, then press the
1-2.
Apply thermal grease on top of the
CPU. Put the CPU Fan down on the
module and
Ň
ip the levers
over the heat sink in place.
