ASROCK 939SLI32-ESATA2, Installation Manual

Page: 22 / 152

2 2 2 2
2 2 2 2 2 2
ASRock 939SLI32-eSATA2 Motherboard
EnglishEnglishEnglishEnglishEnglish
2. If you plan to install two eSATAII devices to this motherboard, you need to
enable both the top and the bottom eSATAII ports of the I/O shield. In order to
enable the top and the bottom eSATAII ports of the I/O shield, you have to
connect the red SATAII connector (SATAII_RED; see p.2 No.16) and the red
eSATAII connector (eSATAII_BOTTOM; see p.2 No.38) with a SATA data
cable first, and then connect the orange SATAII connector (SATAII_ORANGE;
see p.2 No.17) and the orange eSATAII connector (eSATAII_TOP; see p.2 No.
39) with another SATA data cable. After that, both the top and the bottom
eSATAII ports of the I/O shield are enabled.
3. Use the eSATAII device cable to connect eSATAII device and the eSATAII port
of the I/O shield according to the eSATAII port that you enable.
Please make sure to correctly connect the SATAII and eSATAII connectors
with corresponding color so that the eSATAII function will work successfully.
Connect the SATA
data cables to both
red SATAII connector
(SATAII_RED)
and orange SATAII
connector (SATAII_
ORANGE)
Connect the SATA
data cables to both
red eSATAII connector
(eSATAII_BOTTOM)
and orange eSATAII
connector (eSATAII_TOP)
Connect one end of the eSATAII
device cable to eSATAII device
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield